Yarbo Y40 Core with Snow Blower, Lawn Mower Pro, Blower and Trimmer Modules

Little chilly out today. Yarbo mowing so I dont have to.

New drive motors. It's so quiet now!

Great first run with Yarbo (FCG)! Circular mode chewed the lawn edges; parallel worked better. Key suggestions: Tweak mapping for longer continuous paths. Remove chute/auger guards to prevent clogs. Tie settings to a "work plan," not the map area, allowing multiple cleaning patterns per session. Add map editing tools, "no-blow" zones for safety, and roadway definition. Very happy overall and hoping for more snow!

It works, it's awesome, I love it, I'm keeping it!
I can't wait to start receiving future updates and added features like I do on my Teslas. I discovered yesterday that we lack a 'chute clog' sensor. My snow thrower became a snow pusher. I had to go out and clear the chute 1 time. My guess is that I didn't have the auger speed set high enough for the area by the road where the plow piles reside.
The snowblower is capable and has proven its usefulness to me...and my neighbor. Yesterday, it rescued a neighbor who broke a sheer pin on the impeller of his 20 year old Ariens. I made a quick map around his remaining snow and pushed the go button on my phone. We talked while we observed.
Yarbo needs to offer all the owners some pre-IPO stock purchase rights before they decide to list on US stock exchanges. I'm in on this tech. The core will not be the only robot.
I look forward to the spring when I can observe how it mows.

#MyYarboJourney Deer Yarbo, It is essential to remain impervious to the criticisms of others, as your performance has been exceptional. Our collective, consisting of individuals with varied perspectives, proposed changes, and occasional frustration, is deeply invested in Yarbo and recognizes its vast potential. Your dedication to the cause and your ability to effectively manage criticism are truly appreciated.
Video shot in Michigan, 8F Lake effect snow, Jan. 2025

WALL-E at work! Fresh snow!!

Plow blade on, and shove the snow mostly off to the sides, making use of time while the wetness of the snow made the blower less effective and very needy with recurring clogs. Then overnight when temps bottomed out, set the blower on task to blow away all the little ridges of snow left behind by the plow. Et voila: long farm driveway pristine on my way out to work this morning!

Plow blade on, and shove the snow mostly off to the sides, making use of time while the wetness of the snow made the blower less effective and very needy with recurring clogs. Then overnight when temps bottomed out, set the blower on task to blow away all the little ridges of snow left behind by the plow. Et voila: long farm driveway pristine on my way out to work this morning!

Yarbo knocked it out off the park for this storm. Look at my very long driveway, done 100% by the Yarbo! 2 of snow, wet while falling then powdery as temps plummeted.

Buddy is hard at work for me!

This thing is a game changer.
I set it out and let it go. It required zero intervention from me. I was there to watch and things could be refined in my map; but the best part was I was cleaning off the car as Cornelius II did the bulk of the work.

Waking up to a cleared driveway this morning for the win! Six inches of snow fell overnight here in NH but Yarbo proved to be more than up to the task.

So happy with the inaugural run of YarBro Zero issues! We were conservative on our mapping, not going all the way to the busy road. We had our first fans the garbage man was so busy recording he almost drove off with our garbage can! Time lapse at 10X speed.

I wanted to clear some of the snow off the back deck and try some manual control while I was at it. Always impressed with the power of this unit!
https://youtu.be/0YgnPOQ5dHs?si=9LZIACzqSiIBKWVX

I was asked today if those robot snow blowers really work......I said yes they do!!

Ok there apparently has been a little confusion with my Yarbo this is not a remote controlled machine it is completely autonomous. Once it is set up, which takes an average 45 minutes to an hour it takes 5 to 10 minutes to map an area once that area is mapped. You are good to go. Yarbo will go out and run either on a schedule or on your command. And it will go back and recharge autonomously and finish the task if needed. For the time being in they are allowing me to offer a coupon off any of the packages for $400 off. ?

Couple shots during "Snowmageddon" this weekend...It must be said that thanks to the Yarbo snow blower, we have been able to stay at home all along instead of clearing snow in the cold winter.

Well Lithuania also received snow :)
Finally Yarik worked on 100% from start to finish (no error was found, gps was always strong).
Without the Yarbo team I wouldnt have achieved it, all my problems (with the charging dock, GPS etc.) were solved remotely.
Thanks to the Yarbo team for full support.

20cm and more falling of the sky here in Quebec Golden Nugget clearing that for me ??

Insatiable and hungry for more Canadian ???? snow ??

Love setting in the huse and watching Yarbo blow snow !!!

Just look at those lawn stripes

The beautiful stripes and Yarbo!

Recently upgrade to the Pro Mower and its doing a great work! The first days of the season look great.
My observations from the switch:
- surprisingly quiet, I couldnt tell if the blades were spinning.
- it does consume more battery (expected) but still can do the same amount of work per day.
- transferring the map was easy if it is saved in the cloud. Review your work area settings to your preferences with the new module.
and yes, tall antennas still there from snow season